Skip to content
OfficEvolution

Space Planning

How to Plan Cubicle Sizes and Panel Heights Before You Order Workstations

OfficEvolution ·

Most workstation problems start long before the purchase order. They start with a floor plan that looked fine on paper and a panel height nobody questioned. Getting cubicle sizes and panel heights right up front saves you from rework, returns, and a team that spends the next five years working around a layout that does not fit.

Here is how to plan both before you order anything.

Measure the room, then subtract what the building owns

Start with usable floor area, not the rentable square footage on your lease. Deduct columns, exterior glass, core walls, electrical rooms, and the clearance the code requires at egress paths and sprinkler risers. Walk the space with a laser measure and note every obstruction. A column that lands in the middle of a workstation run will change your panel layout, so find it now.

Then map the fixed elements: doors, windows, HVAC diffusers, floor boxes, and data drops. Existing power and data locations often decide where panels can land. Moving a floor box is cheaper than moving a workstation after install.

Pick the footprint from the work, not the catalog

Panel systems come in standard widths, but the workstation size should follow what people actually do. A few working ranges:

  • Focus-heavy individual work: 6 by 6 ft to 6 by 8 ft gives room for a monitor, keyboard, and a place to set paper down.
  • General office work: 8 by 8 ft is a common middle ground, enough for a full desk and a guest chair.
  • Roles with frequent collaboration or multiple screens: 8 by 10 ft or larger keeps the desk usable when someone pulls up a chair.

These are starting points, not rules. A 6 by 6 can work for a call center. An 8 by 8 can feel cramped for a designer running two large monitors and a reference screen. Match the size to the task and the storage the role needs.

Set panel heights by what people should see

Panel height drives privacy, daylight, and how the floor feels. The common heights and what they do:

  • 42 to 48 in: low panels, open feel, good for collaborative teams that want to see each other. Little visual or acoustic privacy.
  • 53 to 58 in: seated privacy. Blocks sightlines when people are at their desks but keeps daylight moving across the floor.
  • 62 to 68 in: standing privacy and better sound control. Common in finance, legal, and any role with confidential calls.
  • 72 in and above: full enclosure. Use sparingly. Tall panels cut daylight and can make a floor feel like a maze.

Think about sightlines from the aisle and from the manager’s desk. A run of 65 in panels along a window wall will block light for everyone behind it. Dropping that row to 48 in often solves the problem without losing privacy where it matters.

Check the code and the lease before you commit

Panel heights and workstation sizes have to clear a few non-negotiables. Confirm that egress paths stay at the width your local code requires. Check that sprinkler coverage is not blocked by tall panels, since some jurisdictions treat panels above a certain height as walls for fire purposes. Review the lease for any restrictions on attaching to the floor or ceiling.

If you are unsure, ask the landlord and the local authority before you order. A five-minute call now beats a failed inspection later. This is the kind of detail a dealer who has installed hundreds of floors will flag early. If you want that review built into your project, our space planning and design team works through it with you.

Plan storage and power into the footprint

A workstation that fits the desk but not the files will not stay organized. Decide up front whether storage lives under the desk, in a shared lateral file, or in a personal pedestal. Under-desk pedestals add depth, so a 6 by 6 with a pedestal and a guest chair gets tight fast.

Power and data follow the same logic. Count the devices each role runs and confirm the panel raceway and floor boxes can carry them. Adding outlets after install means cutting panels or running cable trays, and neither is cheap.

Prototype one workstation before you order the floor

Build a single workstation mock-up in the actual space. Sit in it. Bring in the monitor arms, the chair, and the storage the role uses. Check the sightlines from the aisle and confirm the panel height feels right. A mock-up catches problems a drawing hides, like a panel that blocks a thermostat or a desk that crowds a doorway.

Once the prototype works, the rest of the floor is a repeat. That is also the point to lock the specification so procurement, delivery, and install all match. Our furniture procurement service handles both new and pre-owned product, and a tested layout is what makes either path predictable.

Order with a plan, not a guess

Cubicle sizes and panel heights are the two decisions that shape how a floor works for years. Measure the space, size the workstation to the task, set panel heights by the privacy and daylight you need, and clear the code and lease before anything ships. Build one and sit in it. Then order.

If you want a second set of eyes on your layout before you commit, get in touch. We will review the plan, the product, and the install sequence with you.

Planning an office project?

Get a free consultation from someone with nearly four decades in the field.

Get started